The pilot pin allows you to accurately position the cutter. During drilling, the pilot pin retracts and allows internal coolant to reach the cutting teeth. When the hole is complete, the slug is automatically ejected from the cutter.
Pilot Pins
IBC.70
Pilot Pin, to be used in combination with:
- HCS Cutters, sizes ø12 - 60 mm
- IBS Cutters, sizes ø12 - 60 mm
IBC.75
Pilot Pin, to be used in combination with:
- HMS Cutters, sizes ø12 - 17 mm
- All sizes TRCS Cutters
IBC.80
Pilot Pin, to be used in combination with:
- HCS Cutters, sizes ø61 - 130 mm
- IBS Cutters, sizes ø61 - 130 mm
- HML Cutters, sizes ø18 - 25 mm
IBC.85
Pilot Pin, to be used in combination with:
- HMS Cutters, sizes ø18 - 50 mm
IBC.90
Pilot Pin, to be used in combination with:
- HCL Cutters, sizes ø12 - 60 mm
- IBL Cutters, sizes ø12 - 60 mm
- HML Cutters, sizes ø14 - 17 mm
IBC.100
Pilot Pin, to be used in combination with:
- HCL Cutters, sizes ø61 - 130 mm
- IBL Cutters sizes, ø61 - 130 mm
- HML Cutters sizes, ø26 - 130 mm
IBC.110
Pilot Pin, to be used in combination with:
- Combination of HMS Cutters, ø12 - 17 mm, and IBK.NIT
- Combination of HMS Cutters, ø12 - 17 mm, and IBK.QFN
- Combination of TRCS Cutters and IBK.NIT Adaptor
- Combination of TRCS Cutters and IBK.QFN Adaptor
IBC.130
Pilot Pin, to be used in combination with:
- HCX Cutters, sizes ø61 - 100 mm
IBC.K25
Pilot Pin, to be used in combination with:
- HCY Cutters, ø14 - 50 mm
- Combination of HCL Cutters, 12 - 60 mm, and IBK.NIT
- Combination of HCL Cutters, ø12 - 60 mm, and IBK.QFN
- Combination of HCL Cutters, ø12 - 60 mm, and IBK.25
IBC.K50
Pilot Pin, to be used in combination with:
- HCX Cutters, sizes ø18 - 60 mm
- Combination of HCL Cutters, sizes ø12 - 60 mm, and IBK.50 Extension Adaptor
IBC.K75
Pilot Pin, to be used in combination with:
- Combination of HCL Cutters, sizes ø12 - 60 mm, and IBK.75 Extension Adaptor
IBC.K100
Pilot Pin, to be used in combination with:
- Combination of HCL Cutters, sizes ø12 - 60 mm, and IBK.100 Extension Adaptor